ZARF1560-L-TV

滚针/推力圆柱滚子轴承 滚针/推力圆柱滚子轴承ZARF..-L,双向,适合螺栓安装,长轴定位垫圈

图1-1.jpg 图2.jpg 图3.jpg 图4.jpg
主要尺寸和性能数据
d 15 mm Bore diameter
D 60 mm Outside diameter
H 53 mm Height
Ca 24,900 N Basic dynamic load rating, axial
C0a 53,000 N Basic static load rating, axial
Cr 13,000 N Basic dynamic load rating, radial
C0r 17,500 N Basic static load rating, radial
Cua 7,500 N Fatigue load limit, axial
Cur 2,650 N Fatigue load limit, radial
nG Oil 8,500 1/min Limiting speed for oil lubrication
nG Grease 2,200 1/min Limiting speed for grease lubrication
MRL 0.35 Nm Bearing friction torque
≈m 405.6 g 重量
安装尺寸
Da max 36 mm Maximum diameter of housing shoulder
da min 22 mm Minimum diameter shaft shoulder
t1 0.1 mm Position bore in the housing
尺寸
H1 39 mm Height outer ring over wave washer
C 14 mm Width, outer ring
C1 8 mm Distance to lubrication hole
D1 35 mm Rip diameter shaft washer
D2 24 mm Heeldiameter wave washer long
D3 34 mm Outside diameter wave washer long
B 7.5 mm Width, wave washer
B1 20.5 mm Width wave washer long
B2 11 mm Width heel wave washer long
rmin 0.3 mm Minimum chamfer dimension
r1 min 0.6 mm Minimum chamfer dimension 1
d1 3.2 mm Diameter lubrication hole
J 46 mm Pitch circle diameter (holes)
n 6 Number of screwing holes
n x t 60 ° Split
温度范围
Tmin -30 °C Operating temperature min.
Tmax 120 °C Operating temperature max.
附加信息
caL 1,400 N/µm Rigidity axial
ckL 110 Nm/mrad Tilting stiffness
Mm 0.274 kg*cm2 Mass moment of inertia

1 µm Axial runout
radial ZMA15/33 Recommended INA precision locknut for radial locking (not included)
axial AM15 Recommended INA precision locknut for axial locking (not included)
MA 10 Nm Tightening torque nut

6,506 N Required locknut force

24X35X7 Rotary shaft seal to DIN 3760 (not included)

M6 Size fixing screws DIN EN ISO 4762 10.9 (not included)
na 6 Number of screws
na x ta 60 ° Division (screwing holes)