主要尺寸和性能数据
| d | 40 mm | Bore diameter |
| D | 115 mm | 外径 |
| H | 75 mm | Hight |
| Ca | 117,000 N | 基本额定动载荷, 轴向 |
| C0a | 315,000 N | 基本额定静载荷，轴向 |
| Cr | 38,000 N | 基本额定动载荷, 径向 |
| C0r | 74,000 N | 基本额定静载荷，径向 |
| Cua | 27,000 N | 疲劳极限载荷, 轴向 |
| Cur | 10,400 N | 疲劳极限载荷, 径向 |
| nG Oil | 3,700 1/min | Limiting speed for oil lubrication |
| nG Grease | 1,200 1/min | Limiting speed for grease lubrication |
| MRL | 2.5 Nm | Bearing friction torque |
| ≈m | 2.501 kg | 重量 |
安装尺寸
| Da max | 79 mm | Maximum diameter of housing shoulder |
| da min | 65 mm | Minimum diameter shaft shoulder |
| t1 | 0.2 mm | Position bore in the housing |
尺寸
| H1 | 47.5 mm | Height outer ring over wave washer |
| C | 22.5 mm | Width, outer ring |
| C1 | 12.5 mm | Distance to lubrication hole |
| D1 | 78 mm | Rip diameter shaft washer |
| B | 16 mm | Width, inner ring |
| rmin | 0.3 mm | 最小倒角尺寸 |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| d1 | 6 mm | Diameter lubrication hole |
| J | 94 mm | Pitch circle diameter (holes) |
| n | 12 | Number of screwing holes |
| n x t | 30 ° | Split |
温度范围
| Tmin | -30 °C | 最低工作温度 |
| Tmax | 120 °C | 最高工作温度 |
附加信息
| caL | 3,800 N/µm | Rigidity axial |
| ckL | 1,800 Nm/mrad | Tilting stiffness |
| Mm | 13.3 kg*cm2 | Mass moment of inertia |
| 1 µm | Axial runout | |
| radial | ZMA40/75 | Recommended INA precision locknut for radial locking (not included) |
| axial | AM40 | Recommended INA precision locknut for axial locking (not included) |
| MA | 120 Nm | Tightening torque nut |
| 29,834 N | Required locknut force | |
| M8 | Screw size | |
| na | 12 | Number of screws |
| na x ta | 30 ° | Division (screwing holes) |
